I have a disk image (ghost) of the disk need to be restored, and believe the ghost.exe should run from bootable USB with DOS, but I can't seem to create it. My laptop does not have a a cd-rom or floppy drive.I managed to find a Ghost utility that I could load from a bootable USB drive. Unfortunately, when I plug in my NTFS external drive (USB), it is not detected.
How about give it a try? First download and install it on your computer and then follow the steps below to create bootable USB as well as create image backup. Please remember to backup your USB drive in advance, because it will erase all the data.
Norton Ghost 2003 Dos Boot Cd Iso Download
Greetings all! I am trying like crazy to make a bootable DVD with Ghost 2003 executable file and Image file. I used Nero to make Bootable DVD with rest of the programs on it (Ghost 2003 and Image file). The whole burning process went just fine. Then I tried to restore that image on the other machine. The itself was created using Ghost 2001 (according to Symantec images created using 2001 CAN BE restored using Ghost 2003) First Problem: is that in Dos when I map DVD drive letter and the try to access Ghost 2003 dircetory it would say invalid command. Example: D: and then CD Norton Ghost 2003 (well Ok this is not crucial cause I could still use Ghost 2003 Created boot floppies to get to Ghost.exe) Second Problem: after using Ghost 2003 boot floppies I finally get to the ghost.exe.
I am going to go ahead and try it on DVD +R now. Any suggestion as to why image files do not show up in DOS - Ghost.exe would be greatly appreciated. Hey MauriceX, I installed ghost 2003 on my machine.
Just have problem burning Norton Ghost 2003 and then accessing it in DOS???/ Any help will be appreciated. Should I burn on My DVD so that I can execute Ghost 2003 from DOS? I DO NOT want to use Ghost 2003 option to make bootable floppy disk. I want to have DVD that contains my image files, Bootable files and Ghost Program. Just have problem burning Norton Ghost 2003 and then accessing it in DOS???/ Any help will be appreciated.
Choose to make a bootable floppy disc and make it. (with cd-rom support) download nero and install it if it didnt come with you're burner create a new cd. Choose bootable cd from the list (not in wizzard mode) one of the tabs should have the option to read boot image from floppy, insert floppy and let it extract it click on the new button drag the image files onto the disk (not in a dirrectory) click the burn button under the iso tab use Data mode 'mode 1' File System ISO 9660 Max of 11 Chrs. And DOS or ISO 9660 and uncheck all checkboxes under relax restrictions burn it (to be safe burn it at 1x).
Hi, i think u have do one thing. First creat win98 bootable disk using win98 bootable pc. Start pc in dos mode and insert the floppy in FDD then run the command from the c: prompt 'sys c: a:' make sure do't use the quote marks after that start the pc using this floppy if all steps run properly then u r pc boot from floppy. Now restart u r pc in normal mode and copy the ghost.exe from u r nortan 2003 ghost folder to floppy. And that's it u have done all thing buddy. Now open nero start wiz select boot cd add ghost image file that u create for u r OS when it ask for insert bootable media just insert floppy and burn the cd. I mention u one thing here a cd that it create is bootable but their is one problem to it not support DVD drive for dos mode.
Technical Synopsis: Dell and other computer manufacturers are switching to motherboards that support the newer Serial ATA (SATA) hard drives. To support these drives, these motherboards use newer versions of the Intel chipsets, specifically chipset version 865 and newer. The heart of the issue is that the new chipset makes the the network card and IDE controller to share the communications interrupt. The general release Symantec Ghost 7.5 (and Norton Ghost 2003) is sophisticated enough to no longer use Dos's Interrupt 13h to communicate to the hard drive but use the new method defined by these chipsets. However, it is not sohpisticated enough to allow the network cards to communicate in the same fashion. It assumes all traffic sent on the the hard drive's interrupt is from the hard drive. So, network traffic befuddles Ghost and it locks. You can force ghost to use Int13h using the -fni switch but there is a significant performance hit.
I've done this with both PC-Dos 7.1 and MS Dos 6.22. The boot discs were a pain till I figured all this out. Now they should be easy to maintain. They have access both to the remainder of the CDRom access and to the network. I have a standard boot disk (floppy) that does most of the work and then calls C:\autorun.bat (C: is the CDRom after CD boot) that contains the details for the different configurations of the Gx270s that we use. This means I can always use the same boot.img file to make the disk bootable and I don't have to keep the bootable floppy around after the fact. Then I can simply change the content in the root of the CD to make adjustments to my ghosting method or image used.
Now, about your issue, I think there may be some aspect of your network that I am missing right now. Can I first ask what is inhibiting you from using the subnet that the servers are on, 10.10.1.0/24, during the ghosting process? The final result, the content stored in the image, does not need to be on the same subnet as the one used during casting... In otherwords, use the boot disk to attach to the 10.10.1.0/24 subnet during cloning and casting even though the 10.10.10.0/24 is used when the computer is up and running Windows (or whatever is in the image). 2ff7e9595c
Comments